Marshall Kilburn Handbuch Seite 31

ACTION
Place the Kilburn closer to the Bluetooth device during the pairing
process.
Ensure that the Kilburn is placed near the Bluetooth device, and unob-
structed by obstacles such as walls or doors.
Please ensure that there is no electrical interference surrounding the
Kilburn, that your Bluetooth device is on and working properly.
NOTES:
• A BLUETOOTH DEVICE COULD CAUSE SOUND-RELATED OR TECHNICAL FAULTS,
DEPENDING ON USE, IN THE FOLLOWING CASES:
- WHEN SOME PART OF THE BODY IS IN CONTACT WITH THE RECEIVING/TRANSMITTING SYSTEM
FOR THE BLUETOOTH DEVICE OR THE KILBURN ACTIVE LOUDSPEAKER.
- ELECTRICAL VARIATIONS DUE TO OBSTACLES IN THE FORM OF WALLS, CORNERS, ETC.
- EXPOSURE TO ELECTRICAL DISRUPTIONS FROM DEVICES WITHIN THE SAME
FREQUENCY BAND, FOR EXAMPLE MEDICAL EQUIPMENT, MICROWAVE OVENS
AND WIRELESS NETWORKS.
• THIS WIRELESS DEVICE MAY CAUSE ELECTRICAL DISRUPTIONS DURING USE.
• YOU DO NOT NEED TO ENTER THE PIN CODE (PASSWORD) WHEN CONNECTING THE
BLUETOOTH DEVICE TO THE KILBURN. IF THE WINDOW FOR ENTERING THE PIN CODE IS
DISPLAYED, YOU SHOULD ENTER <0000>.
• YOU CANNOT CONNECT TO A BLUETOOTH DEVICE THAT ONLY SUPPORTS THE HF (HANDS
FREE) AREA FUNCTION.
Plug the power cord into a working wall socket and plug the connector
into the power socket on the back of the loudspeaker and switch the
power switch, to 'ON' position.
Replace the internal battery according to the instruction on page 025.
KILBURN