aurum VIII Bedienungsanleitung Seite 8

Operation with a surround amplifier
Once you have positioned and connected your speakers as shown in the illustration,
you should perform the necessary settings in the bass management system of your
surround amplifier.
Make sure you read the user manual supplied by your amplifier's manufacturer
before doing this.
Since bass management primarily depends on the loudspeaker configuration, we
give only typical settings below.
a) Small and very small satellite speakers must be operated in "small" mode.
Perform the setting on your amplifier as follows:
Front:
Rear:
b) There is no definitive formula for the settings for compact speakers. In this case,
the suitable mode may be "large" or "small". This depends on the volume level
you prefer or the sound effect you wish to obtain (refer to the section "Caution,
clipping!"). The settings on your amplifier can optionally be configured as follows:
Front:
Rear:
right
8
BDA AURUM komplett_08.2009.indd 8
small Centre:
small Subwoofer:
large/small Centre:
large/small Subwoofer:
Subwoofer
Low Level connection
Surround-amplifier
small
yes
large/small
yes
Left
25.08.09 10:46