Changing The Water Level In The Rinse Cycles - Kenwood Mini 1150 rapid Bedienungsanleitung

Changing the water level in the rinse cycles

normal
raised
94
Water level
Whites, coloureds and delicates (P1 / P2):
possible variations: soft water
normal or hard water
How to alter the „normal" water level
• Main switch on
• Turn programme selector to "  " position
• Press button and
--> The digital display will show the " - - " symbol flashing.
• Turn programme selector to P1 or P
--> The digital display will show the selected programme (see symbols).
• Press button to raise or lower the "normal" water level
--> This is indicated by "flashing waves" on the digital display.
• Press button for two seconds, to store the selected water level
--> The "waves" stop flashing
• Turn programme selector to "  " position
• Select required programme - see P. 86 - 87
Please note that all manual programme alterations are stored in your machines
computer.
These alterations are no longer indicated on the digital display once a standard
programme has been re-selected.
To return to standard programm, re-set and save the programm.
Programme intervention
• You can interrupt the selected water level before it is stored in your machine by
returning the programme selector to position "  ".
standard setting:
raised water level
normal water level
simultaneously for 3 seconds
normal