The Programme Sequences - Kenwood Mini 1150 rapid Bedienungsanleitung

The programme sequences

9
P1, P2, P6 Main wash (standard water level)
Cold fill
Washing and heating up to 40°C
(P1 Component programme, P2 Component programme and P2 Economy
programme only)
Washing and heating up to selected temperature
extended wash cycle
(this is not available if you have selected P1 standard programme)
Pump on
P3, P4, P5 Main wash
Cold fill
Washing and heating up to selected temperature
Washing
Pump on
Rinse cycle
Rinse cycle if selected (s. P. 93)
Pump on with spin (short)
Rinse cycle if selected (s. P. 93)
Pump on with spin (short)
Rinse cycle (automatic)
Pump on with spin (short)
Rinse cycle
Pump on with spin (short)
Rinse cycle with cold fill via detergent drawer compartment III (conditioning rinse)
Pump on
Spin
Spin cycle, if you have washed in P1, P2 and P6 a spin speed between
500 and 1100 rpm can be selected
Pump on
Spin cycle, if you have washed in P3, P4 and P5 spinning occurs at
500 rpm only, regardless of the selected spin speed
Pump on