Removal Of Transport Safety Bars; Electrical Connection - Kenwood Mini 1150 rapid Bedienungsanleitung

Removal of transport safety bars

Pic 1
Pic 
Pic 3

Electrical connection

• Plug socket 30 V / 50 Hz
• Rated effect , kW
• Fuse: min. 10 A
• Kindly note the rating label on the back of the machine.
8
The transport safety bars must be removed before using your machine
(see Pic 1 - 3) or your machine could be severley damaged.
• Withdraw both bars from their sockets (Pic 1 - ).
• Seal the holes with the plastic plugs provided (Pic 3).
• In the event of your machine having to be transported, ie moving house it is
essential for the transport bars to be put back into the machine.
• Drain any remaining water from the machine (see emergency draining page
98).
• In order to avoid any water leaking from your machine during transport, the
machine should always remain upright.