Connecting The Outputs - MC Crypt DJ-700 U Bedienungsanleitung

Connection
USB connection (52) CH4
You can connect the USB interface of your computer to this input. Your computer can be used as a playback
device as well.
The interface does not support storage media such as harddisks or memory sticks that are not
equipped with a playback function (player).
MIC AUX RETURN connection (39)
The MIC AUX RETURN sockets are mainly used as the input for a modified stereo effect signal. Connect the out-
put of the effect unit here. When a mono signal is supplied, use the MIC AUX RETURN L socket (MONO).
b) Connecting the outputs
MAIN OUT 1 (40)
Connect this output to a free input of your amplifier.
MAIN OUT 2 (45)
You can connect an additional amplifier to this output to be used in an adjoining room or to provide the signal for
monitor loudspeakers.
SUBWOOFER connection (42)
A subwoofer amplifier can be connected here.
TAPE sockets (46)
If you wish to record the output signal of the mixer with a recording device, connect the recording input of the
device to this socket on the mixer.
EFFECTS SEND FROM PFL sockets (47)
The PFL Signal is present at these sockets. The signal can be fed to an external effect unit. Connect the input of
the effect unit here.
MIC AUX SEND connection (38)
The AUX signal of the MIC channels is present at this socket. The signal can be fed to an external effect unit.
Connect the input of the effect unit here.
HEADPHONE OUT connection (21)
Connect headphones with a 6.3 mm jack plug to this output.
34