Noxon dRadio1 Handbuch Seite 25

1. If no progress bar is shown, the USB stick is not detected by the Radio. Please check
if the USB stick is inserted correctly. If this is the case, please review and repeat the
steps specified above.
2. After successfully updating the firmware the message "Done" will be displayed and
shortly thereafter the display turns black.
3. Turn off the device with the power switch on the rear panel (do not switch the device
into standby).
4. Now you can remove the USB stick and switch your Radio back on again.
Enjoy the NOXON dRadio 1!
Your NOXON Team.
25