Philips FC6144 Bedienungsanleitung Seite 16

English
16
Problem
Dust escapes from
the vacuum cleaner.
The vacuum cleaner
does not work
properly when one
of the accessories is
attached to the
nozzle.
The surface is still
very wet after
vacuuming liquid
(FC6142 only).
Solution
The dust compartment may be full. Empty the
dust compartment.
The dust compartment may not be attached
properly to the appliance. Attach the dust
compartment properly to the appliance.
Perhaps the filter unit is not placed properly in
the dust compartment. Place the filter unit
properly in the dust compartment.
The dust compartment may be full. Empty the
dust compartment.
The accessory may be clogged. Remove the
obstruction from the accessory.
The filter unit may be clogged. Clean the inner
filter and the outer filter (see chapter
'Cleaning').
Perhaps the squeegee is not attached to the
nozzle. Attach the squeegee to the nozzle when
you want to suck up liquid.
Perhaps you do not hold the appliance in the
right way. Hold the appliance with the nozzle
pointing downwards at an angle of 30°. Do not
tilt the appliance to one side and make sure the
squeegee touches the surface to be cleaned.