12/2014
1015739-00
4.10
Cleaning or replacing lamps in the
canopy
–
Removing the canopy panel: see page 49.
The following components listed in the maintenance plan are fitted in the
canopy:
UV low pressure lamps 2.00 m
Beauty Light lamps 2.00 m
–
Please maintain the correct order of the Beauty Light lamps and UV low
pressure lamps.
a1: UV low pressure lamps
a2: Beauty Light lamps
Replacing lamps: see page 53.
The assembly is the same process in reverse order.
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Re-lock the locks: first the lock in the middle, then the outer locks.
Cleaning and maintenance
Operating instructions – 55/70