Selecting The Application Type - ergoline BALANC E 700 HYBRID PERFORMANCE Gebrauchsanweisung

Operation
Pictogram selection / Navigation
key sequence
38/70
Description / Display
Audio system
SD card selection:
Press the plus button
Studio channel selection:
Press the plus button
Select own music (MP3 player)
AUX:
Press the plus button
Switch off the audio system:
Press the minus button
Switch off Voice Guide:
Press the minus button
Switch on Voice Guide:
Press the plus button
3.5

Selecting the application type

(BALANCE 770 BEAUTY SELECT
CLIMATRONIC)
Before the session begins, the desired application type must be selected.
There are 3 possible selections:
PURE BEAUTY: Only the Beauty Light lamps are switched on.

BEAUTY & SUN: Beauty Light lamps and UV lamps are switched on. The

proportion of UV radiation is up to 30 %.
SUN & BEAUTY: Beauty Light lamps and UV lamps are switched on. The

proportion of the UV radiation is higher than the proportion of the Beauty
Light lamps, depending on the skin type and base tan.
– Press the button for the desired type of application.
Information
The +/- buttons can be used to
select titles for internal music in
demo mode and during tanning.
The voice guide provides acous-
tic device operation assistance
and is only available if an audio
system is fitted. Voice Guide is
switched on by default during
stand-by and tanning.