Work Breaks; After Vacuum Cleaning - Fakir Prestige C 240 8901 Bedienungsanleitung

Work breaks

After vacuum cleaning

F
R
Use the park holder of the floor nozzle to hold the suction pi-
pe safely in position when the cleaner is not being used. To
do this, insert the park holder of the floor nozzle into the
nozzle holder on the reverse of the appliance.
Check the appliance and the power cable before use. Faul-
ty appliances may cause injury and should not be used.
● Press the foot button "On/Off" [H] to switch off the vacuum
cleaner.
● Remove the plug from the mains socket.
H
● Press the foot button "Wind cable" [F] to reel in the cable.
Gently guide the cable with your hand until the cable has
been completely wound in.
● Insert the holder [R] of the telescopic pipe [A] into the park
rail on the underneath of the appliance. Now you can car-
ry the appliance easily or place it on the floor.
A
● Store the vacuum cleaner in a place that is out of the re-
ach of children.
Never place the appliance next to heat sources and avoid
direct sunlight, as the heat may damage the vacuum
cleaner.
Operation
WARN'ING!
CAUTION!
GB
33