AEG MRC 4122 F N Bedienungsanleitung Seite 72

English
72
7a. If you want to be awakened by a radio station, select the maximum alarm volume using
and Y-M-D buttons.
8. Finally, press the button again. The first alarm time is now activated.
To set the second alarm time, repeat the above steps with the button.
NOTE:
• When the alarm time has been activated, the display will show the respective
information. ALARM 1 or , or ALARM 2 or .
• In order to briefly display the set alarm times, press the respectively the button.
Turning off the Alarm
Press the button (3) to stop the alarm.
Automatic Alarm Interval
The automatically set alarm function can be shut off for approximately 9 minutes with the
SNOOZE/SLEEP / DIMMER button (2).
NOTE:
If the function has been activated, the respective indicator will be flashing in the display.
Deactivate the Alarm Function
1. Switch the device to standby with the
2. To deactivate the alarm function, keep the button or button pressed. The respec-
tive indicator disappears from the display.
Delayed Shut-Off
You can use the function for delayed power-off with radio operation. The unit is switched
off automatically when the selected time is reached.
• Select the time after which the unit is switched off by repeatedly pressing the
SNOOZE/SLEEP / DIMMER button (2). The following selections can be made: SLEEP
90, 60, 30 and 15 minutes.
• This function can be cancelled with the button (3).
button (3).