Herunterladen Inhalt Inhalt Diese Seite drucken

Switching Off; Temperature Regulation; Drinkschill Function - Electrolux IK2065SR Benutzerinformation

Vorschau ausblenden Andere Handbücher für IK2065SR:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

60
www.electrolux.com
It is possible to change predefined sound
of buttons to a loudly one by pressing
together Mode and temperature colder
3.2 Display
A
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off.
The alarm buzzer could operate after few
seconds.
The temperature indicators show the set
default temperature.
To reset the alarm refer to "High
temperature alarm".
To select a different set temperature refer
to "Temperature regulation".
If "dEMo" appears on the display, refer to
"What to do if..." chapter.

3.4 Switching off

1. Press the appliance ON/OFF button
for 5 seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.

3.5 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulator.
Default set temperature:
• +5°C for the fridge.
The temperature indicators show the set
temperature.
B
C
D
Off
min
H
G
F
If the door remains open for
some minutes, the light will
turn off automatically. The
light is reset by closing and
opening the door itself.
button for some seconds. Change is
reversible.
A) Timer indicator
E
B) Fridge off indicator
C) Shopping function
D) Action Freeze function
E) Temperature indicator
F) Alarm indicator
G) ChildLock function
H) DrinksChill function

3.6 DrinksChill function

The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down a mixture for a
certain period of time, or when a reminder
is needed in order not to forget the bottles
placed in the freezer for fast cooling.
1. Press the Mode until the
corresponding icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3. Press the OK to confirm.
The DrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the
DrinksChill indicator flashes and an audible
alarm sounds that indicates that any
drinks contained in the freezer
compartment should be removed and it is
necessary to press OK to switch off the
sound and terminate the function.
To switch off the function repeat the
procedure until the DrinksChill goes off.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis