Setting Options - Digi-Star SW300 Bedienungsanleitung

SETTING OPTIONS

3
Setting/ Options
Display
Bold
(
Zero Tracking
OFF
1-99/
(ZTRACK)
Weigh Method GENRAL,
(W MTHD)
LOCK
Lock-On 0.50, 0.75, 1.00, 1.25, 1.50,
(LOCKON) 1.75, 2.0, 5.0, 10.0
Unlock 01-99(50%)
Lock-N-Hold
OFF
ON/
(LKNHLD)
Auto Off 15,30,45,60,
(AUTOFF)
OFF
Display Count
.01,.02,.05,.1,.2,.5,
(COUNT)
20, 50,100
Auto-Range OFF
ON/
(ARANGE)
Display Unit LB
/KG
(LB-KG)
Capacity
04000
(CAP)
Span 75%-125%
(SPAN)
Back Light OFF
(BCKLIT)
TIME 1
TIME 2
TIME 3
TIME 4
TIME 5
ON 1
ON 2
ON 3
ON 4
ON 5
5
2
1
4
= Default)
1
,2,5,10,
5. Press and hold
6. Press O repeatedly until desired menu
shows.
7. Press to change setting.
8. Press to save setting and advance to next
menu.
9. Press O repeatedly until indicator returns to
weighing mode to exit.
Description
Adjusts to zero for build-up of snow, mud and manure.
Weight value can be set from 1 to 99 lbs/kgs or OFF
(00).
Select weigh method.
Higher value will lock on quicker but sacrifice accuracy.
Use lowest setting that will consistently lock-on to the
same weight for a restless animal.
The percent of weight required to break the lock and
return to normal weighing.
Holds "Lock-On" weight Restarts when next animal
steps on.
Indicator shuts "OFF" after set period of inactivity.
Select display count size (resolution) of scale.
Scale increases display count size for weights over 300
again at 600 lbs/kgs.
When changing weight unit calibration adjusted so scale
displays accurately in new display unit
Enter maximum weight measurable
Displayed weight value can be adjusted by increasing or
decreasing the SPAN percentage.
Backlight Intensity, see page Fout! Bladwijzer niet
gedefinieerd..
Page 23
for 3 seconds.