Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Locking pins on stoves with rotation function
If the Divino has been fitted with a turntable, a
locking pin is fitted behind the bottom operating
door. This allows the Divino to be fixed in varying
positions. To loosen the fixing, pull the locking pin
lightly upwards and turn it through 180° (let it drop
onto the top bevelled area). To fix, rotate the locking
pin again and let it drop over the bottom part of the
bevelled area. The Divino can be turned through 60°
to the left or right, and has a locking position around
every 15°.
Cleaning and Care
What?
Remove ash from the stove.
Clear the stove and chimney flue
pipes from soot depositions
Clean enamelled surfaces.
Clean the glass pane.
Clean the stainless steel parts
How often?
As required, only when cold.
Caution: the ash does not need to be
completely removed from the
combustion chamber floor. A small
amount of remaining ash is beneficial
to combustion. CAUTION: always
completely empty the ash pan!!).
After every heating season.
As required, only when cold.
As required, only when cold. Before
spraying the glass pane with glass
cleaner, roll up some paper kitchen
roll into a cylinder and place it in the
door frame at the bottom so that no
cleanser can run between the door
frames and the glass.
As required, only when cold.
Locking pin
With w hat?
Remove the ash pan and remove the
remaining ash with an ash shovel or
ash vacuum.
With soot brushes and vacuum
cleaner.
(We recommend maintenance by a
professional.)
Wipe with clean water and a soft
cloth.
Spray with stove glass cleaner (e.g.
from CERA-Design) and wipe.
Protect with a stainless steel cleaning
agent, and perhaps with a stainless
steel care spray.
CERA-Design
by Britta v. Tasch GmbH
Am Langen Graben 28
52353 Düren, Germany
Telefon:
+49 (0)2421-121790
Fax:
+49 (0)2421-1217917
e-mail:
info@cera.de
Werbung
