Becker Centronic TimeControl TC52 Betriebsanleitung Seite 64

Assembly and Operating Instructions
FUNCTION (only when the operating device is discon-
nected, only for qualified electricians)
EXTERNAL ON/OFF/SWITCH, ALARM SIGNAL ON/OFF
(Processing external signals, processing alarm signals)
1. You have confirmed the RUNNING TIME function. EXTERNAL ON will appear.
(EXTERNAL ON/ OFF/ SWITCH describes the external control signals. Default
setting is EXTERN SWITCH)
2. You can select the required setting for the control inputs using the +/- button.
3. Confirm your selection by pressing OK.
Note
The following dialog window will only be displayed if you have selected
DRIVE CONTROLLER.
4. ALARM SIGNAL ON will appear. (The default setting is ALARM SIGNAL ON.)
5. You can switch the ALARM SIGNAL to ON or OFF using the +/- button. Confirm
by pressing OK.
6. The function ALARM SIGNAL ON/OFF has now been set.
7. Please read on for further programming options using the FUNCTION
menu.
64