G21 Perfect smoothie Gebrauchsanweisung Seite 3

EN
Thank you for purchasing our product.
Before use, please read these instructions carefully. After reading the manual you will be sure that
you use the blender safely, comfortably and efficiently and also that you are preventing improper
handling.
I. Product description
Tamper
RPM setting
ON/OFF
Motor
Overload protection
switch
II. Control panel description:
1. Turning the device ON / OFF - switch the button on the left side of the control panel to the ON
position and the appliance is brought into operation. Switch the button to the OFF position to turn
the appliance off.
2. Pulse operation - when the right (Pulse) button is switched to the ON position, the RPM (re-
volutions per minute) will be increased to the maximum speed, regardless of the RPM controller
setting.
3. RPM setting – the RPM controller sets the rotation speed of the blender. Always start the blen-
der with LOW RPM speed and then increase the speed turning the regulator toward HIGH.
Jar
Small lid
Big lid
Blade
Relurner nut
Pulse operation
Motor housing