Specifications - Sharp XG-MB70X Serviceanleitung

SPECIFICATIONS

Product type
Model
Video system
Display method
DMD panel
Lens
Projection lamp
Component input (INPUT 1/2)/
output (OUTPUT) signal
Horizontal resolution
Computer RGB input (INPUT 1/2)/ 15-pin mini D-sub connector
output (OUTPUT) signal
Video input signal
(INPUT 3)
S-video input signal
(INPUT 4)
Audio input signal
USB terminal
RS-232C terminal
LAN terminal
Pixel clock
Vertical frequency
Horizontal frequency
Audio output
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
As a part of policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance specifica-
tion figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
Multimedia Projector
XG-MB70X
NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/
DTV480I/DTV480P/DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I
Single Chip Digital Micromirror Device
Panel size: 0.7"
No. of dots: 786,432 dots (1,024 [H] ✕ 768 [V])
1.5 ✕ electric zoom / focus lens, F2.0–2.5, f = 21.3–31.6 mm
275 W DC lamp
15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
P : 0.7 Vp-p, 75 Ω terminated
B
P : 0.7 Vp-p, 75 Ω terminated
R
750 TV lines (DTV720P)
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω terminated
4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo)
4-pin B-type USB female connector
9-pin mini DIN connector
8-pin RJ-45 modular connector
12–108 MHz
43–85 Hz
15–70 kHz
2.0 W (monaural)
4.0 cm ✕ 2.85 cm oval ✕1 16 Ω
AC 100–240 V
3.9 A
50/60 Hz
370 W (Standard mode)/320 W (Eco mode) with AC 100 V
350 W (Standard mode)/300 W (Eco mode) with AC 240 V
6 W (AC 100 V) – 8 W (AC 240 V)
1,390 BTU/hour (Standard mode)/1,200 BTU/hour (Eco mode) with AC 100 V
1,315 BTU/hour (Standard mode)/1,130 BTU/hour (Eco mode) with AC 240 V
41°F to 104°F (+5°C to +40°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
" ✕ 3 " ✕ 11 " (310 (W) ✕ 89 (H) ✕ 282 (D) mm) (main body only)
12 7 / 33 / 7 /
32 64 64
" ✕ 4 " ✕ 11 " (310 (W) ✕ 104 (H) ✕ 287 (D) mm) (including adjustment foot and projecting parts)
7 7 5
12 / / /
32 64 16
9.1 lbs. (4.1 kg)
Lamp unit (Lamp/cage module) (AN-MB70LP), Remote control (RRMCGA313WJSA), Power cord for U.S.,
Canada, etc. (QACCDA010WJPZ), Power cord for Europe, except U.K. (QACCVA011WJPZ), Power cord for
U.K., Hong Kong and Singapore (QACCBA036WJPZ), Power cord for Australia, New Zealand and Oceania
(QACCLA018WJPZ), RGB cable (QCNWGA045WJPZ), USB cable (QCNWGA014WJPZ), Storage case
(GCASNA014WJSA), Lens cap (RCAPHA021WJSA), Projector manual and technical reference CD-ROM
(UDSKAA052WJZZ), "QUICK GUIDE" label (TLABZA717WJZZ), Operation manual (TINS-B416WJZZ)
TM (DMD TM ) by Texas Instruments
3
XG-MB70X