Focal IMPULSE 4.320 Gebrauchsanleitung Seite 4

IMPULSE 4.320 aMPLIfIEr
U s e r m a n u a l
CAUTION
• Only use your IMPULSE 4.320 amplifier with 12V mobile applications. Any use other than the intended use may
cause a fire, an electric shock or injury.
• Use fuses with the adequate amperage. Failure to do so may cause a fire or an electric shock.
• Do not obstruct the heat sink on your IMPULSE 4.320 amplifier. Internal overheating may occur and cause a fire.
• Wire the connections correctly. Make sure you use the appropriate wire gauge and type of cable. Failure to do so
may cause a fire, injury and/or material damage.
• Do not use nuts or bolts on steering or breaking systems, tanks, seat-belt anchor points or other safety
elements for connecting the ground. Use of these parts as ground may deactivate the vehicle's control system
and cause a fire or other technical problems.
• Keep all small objects which could be swallowed, such as fasteners, screws and accessories, out of the reach of
children. Swallowing such objects may cause serious injuries. If swallowed, seek medical advice.
• Before beginning installation, disconnect the negative terminal of the battery to avoid any risk of injury, fire or
material damage (fig. 1).
WARNING
Prolonged listening at high volumes, over 110dB, can cause long-term damage to your hearing. Listening at
volumes over 130dB, even for short periods of time, can cause permanent damage to your hearing.
Stop operation in the event of a problem. Failure to comply with this precaution may cause injury or material
damage. If a malfunction persists, return the equipment to your Focal dealer for repair.
Use the specified accessories and be sure to install them correctly. Only use the accessories specified in the user
manual and those which are supplied in the packaging. The use of other components could cause internal damage
to the equipment, or it may not be correctly installed. The parts used may become loose and cause damage or a
technical malfunction of the equipment. Failure to do so may cause an accident, a fire or an electric shock.
Do not install this product in very humid or dusty places. Avoid installing the equipment in places with high levels of
humidity or with an excessive presence of dust. Humidity or dust getting inside the product may cause a technical fault.
fig. 1
4