Inhaltsverzeichnis
Werbung
Read-Me-First-Dokument
If the plug contains a removable fuse
cover you must ensure that it is refitted
when the fuse is replaced.
If you lose the fuse cover the plug must
not be used until a replacement cover is
obtained.
A replacement fuse cover can be pur-
chased from your local Panasonic
Dealer.
IF THE FITTED MOULDED PLUG IS
UNSUITABLE FOR THE SOCKET
OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND DISPOSED
OF SAFELY.
THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT
OFF PLUG IS INSERTED INTO ANY
13 AMP SOCKET.
If a new plug is to be fitted please
observe the wiring code as shown on
the right.
If in any doubt please consult a qualified
electrician.
Warning: THIS APPLIANCE MUST BE
EARTHED.
Important
The wires in this mains lead are
coloured in accordance with the follow-
ing code:
Green-and-yellow: Earth
Blue:
Brown:
As the colours of the wires in the mains
lead of this apparatus may not corre-
spond with the coloured markings iden-
tifying the terminals in your plug,
proceed as follows:
The wire which is coloured GREEN-
and-YELLOW must be connected to the
terminal in the plug which is marked by
the letter E or by the safety earth sym-
6
Neutral
Live
bol
coloured GREEN or GREEN-
and-YELLOW.
The wire which is coloured Blue must be
connected to the terminal which is
marked with the letter N or coloured
BLACK.
The wire which is coloured Brown must
be connected to the terminal which is
marked with the letter L or coloured
RED.
The mains plug on this equipment must
be used to disconnect the mains power.
Please ensure that a socket outlet is
available near the equipment and shall
be easily accessible.
How to replace the fuse
Open the fuse
compartment with
a screwdriver and
replace the fuse.
Warnings
This equipment is not designed for
connection to an IT power system.
(An IT system is a system having no
direct connections between live parts
and Earth; the exposed-conducive-
parts of the electrical installation are
earthed. An IT system is not permit-
ted where the wireless display is
directly connected to public supply
systems in the U.K.)
Disconnect the mains plug from the
supply socket when the wireless dis-
play is not in use.
This equipment is produced to BS800/
1983.
Werbung
Inhaltsverzeichnis
