Alde 3010 413 Bedienungsanleitung Seite 8

Assembly instructions for control panel 3010 413
The control panel is intended for the Alde Compact 3010 central heating boiler.
Assembly:
The control panel should be located at least 1 metre from the floor away from potential heat sources. The space
behind the panel should be well ventilated so that the thermostat can function correctly.
If the Control panel has interference from a heat source or cannot be ideally located, a remote thermostat sensor
can be connected to the panel.
Make the cut out for the panel as shown in the diagram below. Ensure the wiring loom is secured so that it is not
under stress. Screw the control panel in place and clip the front cover on.
Scale
1:2
Location of holes
for 3010 413
8
GB
87 mm
MENU
75,5 mm
73 mm
R 5
40 mm
6,5 mm
MENU