Alde 3010 413 Bedienungsanleitung Seite 13

9. The tool menu (functions)
When you have started the tool function, see item 8,
you can use the following tools (see below).
1.
Amp
3.
MENU
1.
3.
MENU
1.
Lan
Ex t
3.
MENU
1.
3.
MENU
Service
Reset
OK
MENU
1. To set the clock, press 1.
2. To set programmable temperature
2.
change, press 2.
3. To set automatic start of the
4.
heater, press 3.
5.
4. To set voltmeter, press 4.
5.
1. To set constant pump operation,
press 1.
2.
2. To set pump selection, press 2
(when installed).
4.
3. To set pump capacity, press 3
5.
(when such a pump is installed).
5.
1. To set temperature adjustment,
press 1.
2.
2. To set automatic temperature
increase, press 2.
4.
3. To set language, press 3.
5.
4. To set external start, press 4.
4.
1. To set button sound, press 1.
2. To lock the tool menu, press 2.
2.
3. To adjust the brightness strength
on the display, press 3.
4.
4.
1. To get to service menu, press 1.
2. To reset the heater to factory
1.
setting, press 2
3. To leave the tool menu, press 3.
2.
3.
GB
You step between the various tool fields by pressing
the arrow symbol up or down. You can always leave
the tool menu with the Menu button.
5. Press the arrow symbol to get to
the next tool field.
4. To set LPG changeover valve,
press 4 (when it is installed).
5. Press the arrow symbols to get
to the next or previous tool field.
5. Press the arrow symbols to get to
the next or previous tool field.
4. Press the arrow symbols to get to
the next or previous tool field.
4. Press the arrow symbol to get to
the previous tool field.
13