Sartorius YDP 20-PH Betriebsanleitung Seite 6

6
Connecting the Printer to the pH Meter
§ Connect the interface cable on the printer to the pH meter.
Secure the connection.
Power Connection
§ Plug the original Sartorius power supply unit into
an electrical outlet.
§ Insert the right-angle plug into the jack on the right-hand
side of the printer's rear panel.
The green LED lights up to indicate the presence
of voltage.
$ Installing the rechargeable batteries: see page 15.
Turning on the pH Meter and the Printer
§ Plug in the AC adapter to power the pH meter:
Plug in the power connection.
§ Turn on the pH meter.
> Control: All elements in the printer display light up.
> The LED on the left-hand side of the front panel lights up.