Disabling/Enabling The Hotkey Delay - G&D TradeSwitch8-PS/2 Bedienungsanleitung

Configuration

Disabling/Enabling the hotkey delay

Press the
Hotkey+Backspace
seconds in order to start the setup mode in the default settings.
You can disable the hotkey delay if you want to start the setup mode immediately
after pressing the key combination.
How to enable/disable the hotkey delay:
1. Press Hotkey+Backspace
mode.
If the hotkey delay is active, press the key combination for seven seconds.
2. Press one of the setup keys listed below to enable/disable the hotkey delay:
7  Enables hotkey delay
8  Disables hotkey delay
1. Use the terminal emulator to establish a connection to the KVM switch.
If the setup menu is not displayed, the Switch mode of the service port is
enabled. Enter »
2. Use the Arrow
3. Press the Space
Yes  Enables hotkey delay
 Disables hotkey delay
No
4. Press the
S
19 · G&D TradeSwitch8-PS/2
(default:
(default:
« to switch to the setup menu.
#!
or Arrow keys to select the
key (repeatedly) to enable/disable the hotkey delay:
key to save your settings.
) key combination for seven
Alt Gr+Backspace
Alt Gr+Backspace
Hotkey Delay
) to enable the setup
row.