Installation Steps; Package Contents; Optional Accessories; Hardware Overview - Axis P5514-E PTZ Installationshandbuch

Installation Guide
This Installation Guide provides instructions for installing AXIS P5514-E/P5515-E PTZ Dome
Network Camera on your network. For other aspects of using the product, see the User Manual
available at www.axis.com

Installation Steps

1. Make sure the package contents, tools and other materials necessary for the installation
are in order. See page 9 .
2. Study the hardware overview. See page 9 .
3. Study the specifications. See page 12.
4. Install the hardware. See page 13.
5. Access the product. See page 16.

Package Contents

• AXIS P5514-E/P5515-E PTZ Dome Network Camera
• Clear transparent dome cover (premounted)
• RJ45 Push-pull Connector (IP66)
• Sunshield, including screws
• Printed materials
- Installation Guide (this document)
- Extra serial number label (2x)
- AVHS Authentication key

Optional Accessories

• AXIS T91A Mounting Accessories
• AXIS T94A03L Recessed mount kit
For information about available accessories, see www.axis.com

Hardware Overview

NO TICE NO NO TICE TICE
Make sure the dome is attached in operation mode, otherwise focus may be affected.
AXIS P55-E Network Camera Series
9