Ozone ANTI-G Betriebshandbuch Seite 7

DEPLOYMENT
To avoid accidental reserve parachute deployment the ANTI-G should
be attached and deployed on the opposite side to your reserve para-
chute handle.
Before deploying the ANTI-G, make sure that the glider is at
trim speed and in straight flight.
Put both brakes into one
hand and open the deploy-
ment bag.
Take hold of the parachute
and positively throw it in a
sideways or rearward direc-
tion to the side.
5
IMPORTANT: The ANTI-G should only be deployed from
straight, trim speed flight, it must not be deployed whilst
accelerated or during a spiral dive.
Initiate the spiral dive as usual ensuring that the turn direction is
towards the ANTI-G is connection.
IMPORTANT: Do not attempt to spiral in the opposite direc-
tion to which the ANTI-G is attached and deployed.
NOTE: Once the ANTI-G is deployed, glide ratio will be
reduced slightly. This does not weaken the glider in any
way since the ANTI-G system is designed to not modify the
angle of attack. The glider changes position, but not the
angle of attack, therefore the wing will behave in the usual
manner.
When you have descended to a safe altitude, exit the spiral dive in
the usual manner. It is recommended to exit smoothly without too
much energy retention.
Once you have regained straight and level flight the ANTI-G should be
disabled.
Ensure that you throw it
to the same side that the
bridle is attached to.