Activating Or Resetting The Ps/2 Mouse Of The Local Targets - G&D CATCenter NEO16 Installationsanleitung

Activating or resetting the PS/2 mouse of the local targets

Unlike USB mouse devices, PS/2 mouse devices do not support the hot plug tech-
nology. It is therefore possible to insert the PS/2 plug while operating but possibly
the target module or the computer connected to it does not detect the input device.
To activate or reset the PS/2 mouse, a special command can be sent from the
CATCenter system to the computer connected to the target module.
Hint: Since the commands differ depending on the used mouse type and the
installed operating system, four different functions are provided.
How to start and use the Mouse utility function:
 Activate the OSD as described above and mark the row Mouse utility.
 Select one of the following functions with the arrow keys and press Enter:
Reset Mouse:
Enable mouse
(for Unix):
Enable Intelli:
Enable Intelli-
Explorer:
resets the PS/2 mouse interface of a Windows computer
activates the PS/2 mouse of a Linux computer
activates the PS/2 wheel mouse of a Linux computer
activates the PS/2 wheel mouse with additional keys of a
Linux computer
Installation Guide
G&D CATCenter NEO · 18