Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Information; Disposal Instructions - Superior DF - 002C Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

31330 A 10/5/07 9:16 AM Page 18

TECHNICAL INFORMATION /

DISPOSAL INSTRUCTIONS

Removing the heating and control sections
The heating and control sections can be removed when
thorough cleaning of the frying container is needed.
Caution!
Before removing the heating and control elements, you
must firstly ensure that the device is switched off,
unplugged from the mains and fully cooled down.
Furthermore, any oil/fat remaining in the frying container
must be disposed of as described earlier.
Remove the lid from the device and take out the fry
basket from the frying container.
Place the device on its side and hold the device
container securely with one hand.
Use your other hand to reach under the control
panel of the device.
Push the control panel upwards and carefully slide it
out of the securing bars upwards and outwards.
Remove the heating and control sections from the
container and ensure they are safely installed until
needing to be re-inserted.
The heating and control sections must never be
soaked in water or washed directly with water.
The frying container can now be removed from the
Composite
TECHNICAL INFORMATION
Model
Line Voltage
Power Rating
Safety Class
Capacity
DISPOSAL INSTRUCTIONS
Electrical appliances do not belong in the household trash. Legislation stipulates that old
appliances must be disposed of via the community's public collection centers or collections of bulk
refuse.
This is the only manner in which old appliances can professionally disposed of and recycled.
C
M
Y
CM
MY
CY CMY
housing and thoroughly cleaned in the sink.
Carefully dry the container afterwards.
The device must not be re-assembled until all parts
are thoroughly dry again.
When ready, replace the frying container correctly
into the housing.
Afterwards, take the heating and control sections
and replace them from above into the securing bars.
Again, slide carefully until the sections have gone
down to the full extent onto the bars.
Caution!
The heating and control sections must not be secured
separately or loosely. For this reason, an automatic
safety device prevents the operation of the element if it
has not been correctly inserted in place. This device must
not be overridden!
DF-002C
220-240 V
50 Hz
~
2200 Watts
I
c. 3 litres
19
K
GB

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10000271

Inhaltsverzeichnis