Background Color; Remote Settings - Optoma DS330 Handbuch

Keypad Lock
When the keypad lock function is “"On”", the control panel will be locked how-
ever, the projector can be operated by the remote control. By selecting “"Off”",
you will be able to reuse the control panel.
Note
To turn off the keypad lock, press and hold “"Enter”" key on top of the projector for 5 seconds.
Test Pattern
Display a test pattern. There are Grid, White pattern and None.
IR Function
Choose “"On”" to turn on the IR receiver. Choose “"Off”" to turn off the IR
receiver.

Background Color

Use this feature to display a “"Black”", “"Red”", “"Blue”", “"Green”" or “"White”",
screen when no signal is available.

Remote Settings

Allow user to define a short cut key on the remote control, and the function
item is selected in OSD menu.
Advanced
Direct Power On
Choose “"On”" to activate Direct Power mode. The projector will automatically
power on when AC power is supplied, without pressing the “" ”" key on the
projector control panel or on the remote control.
Auto Power Off (min)
Sets the countdown timer interval. The countdown timer will start, when there
is no signal being sent to the projector. The projector will automatically power
off when the countdown has finished (in minutes).
Sleep Timer (min)
Sets the countdown timer interval. The countdown timer will start, with or
without a signal being sent to the projector. The projector will automatically
power off when the countdown has finished (in minutes).
Quick Resume
If the projector is accidentally turned off, this feature allows the projector to
be instantly powered on again within 100 seconds of power down.
Power Mode (Standby)
Set whether the VGA-OUT function works when the projector is in standby
(powered off but connected to AC power).
EN-40