Kenwood KMM-BT502DAB Bedienungsanleitung Seite 23

TROUBLESHOOTING
Symptom Remedy
• This unit can only display uppercase letters, numbers,
Correct characters are not
displayed (e.g. album
• Depending on the display language you have selected
name).
"NA FILE" Make sure the media contains supported audio files.
( 22, 23)
"READ ERROR" Copy the files and folders onto the USB device again. If
this does not solve the problem, reset the USB device or
use another USB device.
"NO DEVICE" Connect a USB device, and change the source to USB
again.
"COPY PRO" A copy-protected file is played.
"NA DEVICE" Connect a supported USB device, and check the
connections.
"NO MUSIC" Connect a USB device that contains playable audio files.
• Reconnect the iPod.
"iPod ERROR"
• Reset the iPod.
• Sound cannot be heard • Reconnect the Android device.
• If in [HAND MODE], launch any media player
during playback.
• Sound output only from
• If in [HAND MODE], relaunch the current media
the Android device.
• Restart the Android device.
• If this does not solve the problem, the connected
and a limited number of symbols.
( 5), some characters may not be displayed
correctly.
application on the Android device and start playback.
player application or use another media player
application.
Android device is unable to route the audio signal to
unit. ( 23)
Symptom Remedy
• Make sure KENWOOD MUSIC PLAY APP is installed on
Cannot playback at
[BROWSE MODE].
• Reconnect the Android device and select the
• If this does not solve the problem, the connected
• Switch off the developer options on the Android
"NO DEVICE" or "READING"
keeps flashing.
• Reconnect the Android device.
• If this does not solve the problem, the connected
Playback is intermittent or Turn off the power saving mode on the Android device.
sound skips.
• Reconnect the Android device.
"ANDROID ERROR" /
• Restart the Android device.
"NA DEVICE"
• Search from the Bluetooth device again.
No Bluetooth device is
• Reset the unit. ( 3)
detected.
• Make sure you have entered the same PIN code to
Bluetooth pairing cannot
be made.
• Delete pairing information from both the unit and the
• Adjust the microphone unit's position. ( 12)
Echo or noise is heard during
• Check the [ECHO CANCEL] setting. ( 14)
a phone conversation.
• Reduce the distance between the unit and the
Phone sound quality is
poor.
• Move the car to a place where you can get a better
the Android device. ( 9)
appropriate control mode.
Android device does not support [BROWSE MODE].
( 23)
device.
Android device does not support [BROWSE MODE].
( 23)
both the unit and Bluetooth device.
Bluetooth device, then perform pairing again. ( 12)
Bluetooth device.
signal reception.
ENGLISH
21