Auto Search Function; Manual Search Function; Delete Channels From Total List; Edit Channel Name - Schwaiger DSR 6005T Bedienungsanleitung

9.5 Auto Search Function

When you set up your receiver for the first time, an "Auto
Search" process will start automatically. If it should fail for
some reasons or you wish to search for new TV channels,
please follow the steps listed below.
Select "Auto Search" in the "Installation" menu and then
press the OK button.
TV (and radio broadcast channels, if available) will be
searched.
The names of the found channels will be listed.
After the search process has been finished, the unit automatically turns to normal TV viewing
mode.

9.6 Manual Search Function

Use this channel search by entering the multiplex information
manually to the receiver. This channel search is often used to
search for a particular channel or those channels that "Auto
Search" has missed, but it requires comparatively more
expertise.
GB
Select "Manual Search" in the "Installation" menu and then
press the OK button.
Select the multiplexes (TV channel packages) you want to
search, using the
After the settings are completed, press the RED button to start "Manual Search".
The names of the found channels will be listed.
After the search process has been finished, the unit automatically turns to normal TV viewing
mode.

9.7 Delete Channels from Total List

When performing an "Automatic Search" also some unwanted channels may be caught. To delete
individual channels from the "Total List" :
Go to "Channel Manager" and select "Remove Channels from Total List".
Select unwanted channel(s) with the
Shift selected channel(s) into the trash can "Recycled", using the
Press GREEN button to move to the trash can "Recycled".
Press OK to shift back channels from trash can to the "Total List", if needed.
Press EXIT to delete all channels from the trash can. A warning message appears. Press OK for
delete, press EXIT to cancel the delete process.

9.8 Edit Channel Name

If you would like to change or amend the names of TV or radio stations in the program lists ("Total
List" or "Favorites List") you can do so in "3. Edit Program Names" in the menu, "Channel
Manager". Select the corresponding program list with the
OK. Select the name to be edited with the
You can delete the letters of the previous name with the (-) button on the remote control one by
one.
Use the buttons
pressing OK.
You can enter numbers using the numeric buttons.
After completing the entry, confirm the new name by pressing the RED button.

9.9 Selecting Languages (Menu, Sound, Subtitle)

You can select the Language for menus and the main language for Sound and Subtitles from
several options in the menu "General Settings". The software version of the receiver determines
the available languages; the selection might differ among different countries.
buttons and OK.
buttons and OK.
and to select the letters for the new name and confirm each time by
buttons and launch it by pressing
buttons and press OK.
button.