Frequently Asked Questions - Asus RP-N12 Handbuch

Frequently Asked Questions

Q1: What should I do if my router does not support WPS?
• You can use Option A to set up RP-N12.
Q2: Why is that the Wi-Fi LED does not light up after completing Method Two?
• You may have entered the wrong router SSID and password. Reset your RP-N12, double check your router SSID/password, and set
up RP-N12 again.
Q3: Why is it that I cannot see the login page after entering http://repeater.asus.com in the browser?
• Ensure that your computer is connected to the extender network only, and set your computer to Obtain an IP address auto-
matically.
Q4: My router security is WEP, and I entered a wrong passphrase or security key on the extender. Now I
cannot access the Extender any more. What can I do?
• The Range Extender cannot check whether the WEP passphrase is correct or not. When entered a wrong passphrase, your wire-
less device cannot get the correct IP address from the Range Extender. Please reset the Range Extender to its factory defaults to
get the IP address back.
Q5: How do I reset RP-N12?
• Using a pin, press the RESET button for about two (2) seconds. Wait for about five (5) seconds until the Wi-Fi LED flashes red.
u10206_RP-N12_QSG.indb 11
11
2015/4/13 21:21:45