Maintenance - perrot P2S Bedienungsanleitung

5.4 Winter proof
During the frost period please take care, that there is no water standing in the
sprinkler. Remaining water in the piston drive, does not cause frost damages. Is the
sprinkler put again into operation, although in the piston area is still ice, it will take
about 15 minutes to defrost the drive, when the ice temperature is approx. –20°C.

6. Maintenance

6.1 Lubricate the thread on the steel pipe
When changing the main nozzle, the thread on the steel pipe and on the O-ring seat
should be cleaned and lubricated.
Therefore the nozzle can be removed easily by hand and also pulled again.
TDP057d+e.doc
Perrot REGNERBAU CALW GmbH
Rev. 22.10.2010
Industriestraße 19-29 / D-75382 Althengstett / Germany
Telefon : 0049-7051-162-0 / Fax : 0049-7051-162–133
E-mail :perrot@perrot.de / E-mail Konstruktion : technik@perrot.de
O-ring
Jet pipe
Outlet nozzle for control water
picture 4
Seite / Page 16 / 20
nozzle