AERA Superior Bedienungsanleitung Seite 33

MENU SySTEM
• Using F / E buttons in the Install menu, select your
Teletext region. There are five options to select:
West Europe, East Europe, Turk/Gre, Cyrillic and
Arabic/Hebrew.
Install menu in Av modes
The following screen appears in the install menu:
Programming
• By pressing G / H select Programming Mode.
• After pressing E button, programming menu
appears on the screen.
Colour System
• By pressing G / H select Colour System.
• By pressing F / E button, you can change the
colour system to PAL, SECAM or AUTO.
Program Table
By moving the cursor in four directions you can reach
20 programmes in the same page. You can scroll the
pages up or down by pressing the navigation buttons
to see all the programmes in TV mode (except the AV
mode). By cursor action, programme selection is done
automatically.
Name:
To change the name of a programme, select the pro-
gramme and press the YELLOW button.
The first letter of the selected name starts to blink. Press
G / H button to change that letter and F / E button to
select the other letters. By pressing the YELLOW button,
you can store the name.
Move:
Select the programme that you want to insert by navi-
gation buttons. Press the GREEN button. By navigation
buttons, move the selected programme to the decided
programme space and press the GREEN button again.
Delete:
To delete a programme, press the RED button. Pressing
the RED button again erases the selected programme
from the programme list, and the programmes below
shift one up.
APS (Auto Programming System)
When you press the BLUE button for APS, Auto
Programming System Menu will appear on the Screen.
Favourite Mode:
You can set various channels as favourites so that only
the favourites are navigated. To set a favourite, use
navigation buttons to select a channel and then press
the " " item. The channel selected as a favourite
appears in the Program Table with a favourites icon
( ) against the channel name. For removing a
favourite, carry out the same operation. To exit, press
MENU.
Program Lock:
Program Locking provides a password-protected access
to channels selected by parents. In order to lock a
channel you should know the Program Lock password
(default value is set to 0000 in the factory and can only
be changed from the Program Lock Menu).
Enter PIN:
Select the channel that you desire to lock by high-
lighting it and press "
button is pressed, Program lock menu will be displayed
on screen.After entering the pin code, desired channel
will be locked. The program lock icon will appear next
to the channel name. When the locked channel is

" button. When the "
GB
"