Installation Of Device On The Wall (Optional) - AERA Superior Bedienungsanleitung

FEATURES /
INSTALLATIoN oF DEvICE oN ThE wALL
• Forward or backward automatic tuning.
• Sleep timer.
• Child Lock.
• Automatic sound mute when no transmission.
• NTSC Playback.
• AV in and S-VHS in are available.

INSTALLATIoN oF DEvICE oN ThE wALL (oPTIoNAL)

1. To install the TFT TV on the wall, first of all, foot
assembly should be removed. Unscrew the 2 screws
that attach the foot top cover and the 4 screws that
attach the foot to the TFT panel and remove the foot
assembly from the TFT panel.
2. Place the 4 hangers to the circular screw holes at
the rear of the TV and screw them to the TFT panel
with 4 (M4 x10) screws.
• AVL (Automatic Volume Limiting)
• When no valid signal is detected, after 5 minutes
the TV switches itself automatically to stand-by
mode.
• PLL (Frequency Search)
• Audio Line-out
. Decide the place on the wall where the TFT panel
would be placed. Level and mark with a pencil the
4 mounting points on the wall hanger. Drill pilot
holes for the plastic anchors and then fix the wall
hanger with 4 screws (4x0).
4. Raise the TFT panel and hang it to the holes on the
wall bracket from the 4 hanging screws at the rear
of the TFT panel.
25
GB