Decoder; Tv And Video Recorder; Playback Ntsc; Copy Facility - AERA Superior Bedienungsanleitung

CoNNECT PERIPhERAL EQUIPMENT /

SwITChING ThE Tv oN/oFF

If the VCR is connected via Aerial input, it is suggested
to use Programme 0.

Decoder

If you are subscribed to cable TV offers, the organisa-
tion will supply you a corresponding decoder unit to
allow the programmes to be unscrambled.
For further information consult your dealer.
Connect a decoder with an aerial socket to
the Tv
• Connect the aerial cable.
Connect a decoder without an aerial socket to
the Tv
• Connect the decoder to the EXTERNAL socket of TV
with a RCA cable. Through the SCART/RCA socket
of the decoder, you may attain a better display
resolution.

Tv And video Recorder

• Connect the aerial cables.
Better picture quality can be obtained if you also
connect a Scart cable to SCART sockets.

Playback NTSC

• Connect NTSC VCR player to a Scart socket of the TV.
Then, press the "AV" button to select EXT1 or EXT2.

Copy Facility

Source selection for VCR recording.
• Select Feature menu.
• Select SCART 2 Out by pressing F / E button.
• For copying the picture that comes from the tuner,
select SCART 1.

Camera And Camcorder

To Connect To Av Input
Connect your camera or camcorder to EXT input of
the TV.
• Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You must connect the jacks into the input with
the same colour.
To Connect To S-vhS Input
Connect your camera or camcorder S-VHS input of the TV.
• Connect your equipment to the TV via S-VHS input
and audio inputs of AV inputs by using S-VHS cables.

Connect The Decoder To The video Recorder

Some video recorders have a special Scart socket for
decoder.
• Connect a Scart cable to the Scart socket of your
decoder and to the special Scart socket of your video
recorder. Refer to the booklet of your video recorder.

Connecting headphones

Use the stereo headphone socket of the TV, to connect
headphones.
NOTE: If you want to connect more equipment to your
TV, consult your dealer.)

Audio Line-out

To connect the external speakers to your TV, use the
Headphone Line-out of the TV. Additionally, turn "Line-
out" setting on in the "Sound Menu".
SwITChING ThE Tv oN/oFF

To switch the Tv on:

Your TV will switch on in two steps:
1. Connect the power to 220-240V AC, 50Hz, press
stand-by button. Then the TV switches itself to stand-
by mode (optional).
2. To switch on the TV from stand-by mode either:
Press a digit button on the remote control so that a
28