Remote Socket; Trouble Shooting - Vela 1500S Bedienungsanleitung

6:
LED display
HENSEL Studiotechnik

Remote Socket*

VELA AS power packs can be operated using the generator
front panel or in the most important functions using the Cable
Remote Control RC-X, which is available as accessory (Code
No. 3310). The remote control unit will be connected via the
supplied cable to the remote socket of the power pack (on the
right side of the housing).
Provided functions of the Remote Control RC-X:
•
STBY
Pressing the STBY key switches the power pack to the
stand-by mode. The display 6 shows „--"
•
PILOT
Pressing the PILOT key switches the modeling lamp for
PROP operation on or off. The modeling lamp output is
proportional to the chosen flash power.
•
Flash control
By turning the flash control switch the flash output can be
defined in 2/10 f-steps over a range of 6 f-stops.
•
READY
Lighting up signals flash readiness.
•
TEST
Pressing the TEST button enables manual flash release.
•
SYNC
Additionally one synchronization socket is available.

Trouble shooting*

Er 01 - Er 07
Those error messages appear when one or more heads have
not triggered. Automatic reset.
Error
Er 01
Er 02
Er 03
Er 04
Er 05
Er 06
Er 07
Er 21 - Er 34
Error messages because of overheating. Reset automatically
after a cooling down period. Do not switch off the unit to allow
fan cooling.
User Manual VELA S and AS Power Pack
Not triggered
Head 1
Head 2
Head 3
Head 1 and 2
Head 1 and 3
Head 2 and 3
Head 1, 2 and 3
37