Herunterladen Inhalt Inhalt Diese Seite drucken

Flash Readiness; Apd System; Modeling Lamp; Audio - Vela 1500S Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

User Manual VELA S and AS Power Pack
READY
FC

AUDIO*

9:
LAMP
10:
FULL
PROP
1:
FC
2:
AUDIO*
12:
TEST
36

Flash readiness

Flash readiness of the power pack is shown by
READY control lamp 11 turned on (green light)
Modeling lamp turned on when Flash Check mode is
activated (switch 1)
Acoustical signal, when AUDIO* 2 is switched on.

APD system

In case of reducing the flash power, the stored energy will be
discharged by APD-system (Automatic Power Drop). No flash
will be triggered. After switching off power packs will be
automatically discharged.
Modeling lamp – VELA AS
The modeling light is turned on and off, respectively, using
switch 9. Turning on of the modeling lamp is only effective,
when the connected flash head and modeling lamp are
switched on.
FULL
When switch 10 is set to „FULL" position, the maximum output
of the modeling lamp (650W/230V, 300W/115V) is achieved
independantly of the flash output setting.
PROP
To have proportionality between modeling lamp and flash
power output switch 10 has to be set to „PROP. When the
maximum flash power output is reduced, the maximum
modeling lamp output (650W / 300W) is proportionally dimmed.
The mode of operation is indicated by the control LED.
Modeling lamp – VELA S
By pressing the toggle switch it can be chosen between the
modeling light options FULL – PROP – OFF. Description of the
functions see above.
Flash Check
If this mode is switched on using switch 1 (LED indicator lights
up), then the modeling lamp is turned off after a flash and is
turned on after recharging to the adjusted power level. This
shows correct charge as well as readiness to flash.
The flash check mode guarantees that the flash heads have
triggered when more than one flash unit is used.
Audio*
Readiness to flash after charging is signalled with a tone. This
tone can be turned on (control LED lights up) or off using the
AUDIO switch 2.

Test flash

By pressing button 12 test flashes can be released.
HENSEL Studiotechnik

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

1500as

Inhaltsverzeichnis