SUNTEC DryFix 20 Pure Bedienungsanleitung Seite 16

The temperature on the inner sensor will be measured every 30 minutes. If the temperature on
the inner sensor ≤ 1° C, the compressor switches off and the defrosting function will be
activated for 10 minutes.
DryFix 20 PURE Control panel / Operation instructions
1. Power indicator (green)
2. Timer indicator (green)
3. Water tank indicator (red)
4. Low fan speed indicator (green)
5. High fan speed indicator (green)
6. Laundry mode indicator (green)
A. On/Off button
B. Timer button
C. Fan speed button
D. Laundry mode button
E. + F. Dehumidifying level setting buttons
Display
 Once the unit is turned on, the display indicates the ambient humidity level.
 Once you have set the desired room humidity, this will be shown on the display.
 Once you have set the on or off time (timer function), the number of hours will be shown
on the display.
 If the ambient humidity level is less than 35%, the display will show "LO".
 If the ambient humidity level is higher than 95%, the display will show "HI".
Operating the unit
 Please plug the unit in and press the button
 Please press the buttons
level can be set between 30% and 90% in 5% interval.
to turn the unit on or off.
and to set the desired humidity level. The humidity