Secureeasysetup; Figure 5-5: The Secureeasysetup Button; Figure 5-7: Where Can I Find The Button; Chapter 5: Using The Wireless Network Monitor Secureeasysetup - Cisco Linksys WPC54GS Benutzerhandbuch

Wireless-G Notebook Adapter with SpeedBooster

SecureEasySetup

While using the Monitor, you might see the SecureEasySetup button on the right-hand side of the screen. This
button can be used to set up the Adapter, if this has not already been done. With SecureEasySetup, setting up the
Adapter is as simple as pushing a couple of buttons. Before you press any buttons, though, you should locate the
SecureEasySetup button on the device you're connecting the Adapter to, such as a wireless router or access
point.
1. After clicking the SecureEasySetup button, you will be asked to locate the SecureEasySetup button or
Cisco logo button on the device with which the Adapter will be communicating. If you are not sure where to
find this button, click Where can I find the button?.
This will walk you through a couple of screens to help you find the button, which is usually located on the
front of the wireless router or access point.
If you've clicked the button by accident or do not wish to use SecureEasySetup, you can click Back to return
to the previous screen.
Chapter 5: Using the Wireless Network Monitor
SecureEasySetup

Figure 5-5: The SecureEasySetup button

Figure 5-6: Locate the Button

Figure 5-7: Where can I find the button?

23