Adjust Desired Water Temperature; Check And Set Parameters; Setting Time - Midas Mida Black 8 Handbuch

2.4 Adjust desired water temperature

1.First select desired mode, auto, heating or cooling.
2.No matter the heat pump is under standby status or running status, press
show the desired water temp. of selected mode with a flashing value, then change the water temp.
by moving or as requested.

2.5 Check and set parameters

Press MENU button for 5 seconds display will
show parameter number with value flashing
together.
Move and button to check required
parameter settings.
Select desired parameter and press Menu button
for resetting parameter. Parameter number stays
fixed while parameter value remains flashing.
Move and button to adjust the value.
Press Menu button to confirm the setting.
Without any further movement on the display button
in 5 seconds it will return to main interface automatically.
Note: All parameters can be changed ONLY under standby status !

2.6. Setting Time

Press MENU button in a quick stop to activate time setting.
When hour numbers are flashing it is available for revision move
Press MENU button to confirm hour setting.
Minute numbers start flashing once the hour numbers are confirmed, move
Press MENU button to confirm minute setting.
or
Figure 2-5
or to fix hour numbers.
or
11
, display will
parameter
value
MODE MENU
to fix minute numbers.