Specifications - Caliber MCD 220 Handbuch

Specifications

General
Power supply: 12V DC (11V-16V)
Test voltage 14,4V negative ground
Maximum power output: 70W x 4 channels
Continuous power output: 28W x 4 channels
Suitable speaker impedance: 4-8 ohm
Pre-Amp output voltage: 5V (CD play mode: 1kHz, 0dB, 10K load)
Fuse: 15A
Dimensions (WxHxD) 178 x 50 x 155mm
Weight: 1.7kg
FM Stereo Radio
Frequency range: 87.5 - 108.0MHz (Europe Model)
87.5 - 107.9MHz (USA Model)
Usable sensitivity: 8dB
Frequency response: 30Hz - 15kHz
Stereo separation: 30dB (1kHz)
Image response ratio: 50dB
IF response ratio: 70dB
Signal / noise ratio: 55dB
MW (AM) Radio
Frequency range: 522 - 1620KHz (Europe Model)
530 - 1710KHz (USA Model)
Usable sensitivity (S/N= 20dB) 30dB
Disc Player
System: Disc digital audio system
Frequency response: 20Hz - 20kHz
Signal / noise ratio: > 86dB
Total harmonic distortion: Less than 0.20% (1kHz)
Dynamic range: 95dB
Channel separation: > 60dB
Components
Mounting collar: 1
Tapping screws M5 x 6mm 4
Mounting bolt (50mm) 1
Wire connector 1
Removable face plate case 1
Trim plate 1
T-key 2
Operating instructions 1
Rubber cushion 1
Remote control optional
Note: Specifications and the design are subject to change without notice
due to improvements in technology.
GB 16