Appendix; Technical Data; Guarantee - AGFA AS 1111 Bedienungsanleitung

Appendix

EN

Technical Data

Type ........................ Color Contact Image Sensor (CIS)
Dimensions
Dimensions (L¦×¦H¦×¦W) ......................... 156¦×¦46¦×¦38¦mm
Weight
Weight............................................................................. 0,17¦kg
Input
Mains Connection
.............. Input: 100¦–¦240¦V¦~ (±¦10¦%) / 50¦–¦60¦Hz
Output
........................................................Output: 6¦V¦† / 1.5¦A
Power Consumption
Power Consumption
Operation
Operation............................................................................<¦9¦W
Recommended Ambient Temperature
Recommended Ambient.................................. 15¦–¦35¦ºC
Relative humidity
Relative humidity
......................................... 20¦–¦70¦% (non-condensing)
Scanner
Input format..................................................... 48 bit colour
Output format............................................................... 24-Bit
Maximum hardware resolution ...1800¦×¦1200 Pixel
Document feed slot
Maximum thickness of cheque cards/plastic cards
......................................................................................1,5¦mm
Paper formats supported
Minimum (B¦×¦L) ................................................... 42¦×¦20¦mm
Maximum (B¦×¦L) ......................................... 105¦×¦304,8¦mm
Paper Weight ................................................. 50¦–¦105¦g/m2
Computer connection
Connection Type ..... Compatible with USB 2.0 High
Speed
Subject to Change
Technical specifications subject to change with-
out notice.
Spaltenumbruch
11

Guarantee

(Terms and Conditions for United King-
dom only)
In order to supply the guarantee, you should con-
tact your dealer or Sagem Communications Help-
desk. The proof of purchase will be required.
Please make usage of your equipment for the pur-
pose for which it was designed and under normal
usage conditions. Sagem Communications do not
accept any liability for any usage made out of the
frame of its original designed purpose and any
consequence that may arise from this usage.
Should any malfunctioning arise, the dealer or
Sagem Communications Helpdesk will advise you
what to do.
A) General Guarantee Conditions
Sagem Communications undertakes to remedy by
repair or exchange at its own convenience, free of
charge for labour and replacement parts, any de-
fects in the equipment during the guarantee peri-
od of 12 -twelve- months (3 -three- months for ac-
cessories), from the date of original invoice of the
Equipment, where those defects are a result of
faulty workmanship.
Unless the customer has concluded with Sagem
Communications a maintenance contract in re-
spect of the equipment which specifically provides
for repairs to be carried out at the customer's
premises, the repairs will not be carried out on the
equipment at the customer premises. The cus-
tomer must however return the defective equip-
ment at his/her own expense, to the address giv-
en by the dealer or Sagem Communications Help-
desk.
In case a product needs to be sent in for a repair,
it always has to be accompanied by a proof of pur-
chase (which is not altered, written on or in any
way be made illegible) showing that the product is
still under warrantee. In case no proof of purchase
is enclosed, the Sagem Communications repair
center will use the production date as a reference
of establishing the warrantee status of the prod-
uct.
Apart from all legal obligatory rules, Sagem Com-
munications, do not give any Guarantee, either im-
plicit or explicit which is not set force in the
present section, and could not be hold responsible
for any direct or indirect, material or immaterial
damage, in or out of the frame of the present
guarantee.
If any provision of this guarantee shall be held to
be in whole or in part invalid or illegal due to an ob-