Base Key Functions; Outgoing Messages - Topcom BUTLER 1651 Bedienungsanleitung

new messages. If the answering machine is switched off, the LED display does not light up
and also the LED will be turned OFF.
'FL' will be shown on the display when the internal memory is full and no new messages can
be recorded.

11.2 Base Key Functions

The &
Key
Press key briefly
1 Play OGM
Playback messages
2
3
4 Set volume
speech + ringing
Select OGM
5
/
Play VIP-code
6
Current number of
7
ring tones
8
Record telephone
9
conversation when
handset is off-hook

11.3 Outgoing Messages

Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).
• Outgoing message 1 for the answering function and possibility for callers to leave a
message.
• Outgoing message 2 for the answering function without allowing callers to leave a
messages on the machine.
11.3.1 Recording outgoing messages (OGM 1 or OGM 2)
• Press the -key to select the OGM.
• The answering machine will playback the recorded OGM
• Press the -key for two seconds
• Record the outgoing message after the beep
• Press the Stop -key to stop recording.
Topcom Butler 1651/Twin/Triple/Quattro
keys are at the bottom of the base.
Stand-by mode
press key for 2 seconds
None
Answering ON/OFF
None Delete all messages
Topcom Butler 1651/Twin/Triple/Quattro
Record OGM
None
Record memo
None
Set VIP-code
Set numbers of
ring tones
None
During message
play-back
Go to previous message
Pause
Skip message
Set volume
Stop
None
None
Delete message or
delete OGM
None
15