Installations Hints For Connecting To Controlled Audio Sources (E.g. Hifi System) - Grundig WT2 Montageanleitung

Fig. 4
6. Installation hints for connecting to controlled audio sources (e.g. hifi system)
The "WT 2" system along with the active loudspeakers can be connected to any controlled audio source (e.g. hifi system) for wireless
sound transmissions (0.5-450mV
– Fix the aerial module (part no. 296384160201) as high as possible and exposed to a non metallic material.
– Assign the phono cables to the sockets on the "WT 2" according to the table and their marks (A/B) and select the corresponding
position of the "CH-SELECT" switch.
Number of
active loudspeakers
Surround (2)
– Install the active loudspeakers, see user manual of the "WT 2".
– Connect the plugs of the phono cables according to their marks (A/B) to the controlled audio outputs of your audio source (e.g
hifi system).
20
C
D
≤ 2kΩ).
, R
rms i
Sockets "B"
left right
1 X
X
2 X X
3 X X
4 X X
Sockets "A" Switch position
left right CH-SELECT
1
2
2
X 3
X X 4
Änderungen vorbehalten / Subject to alteration • 720100430003 • 0403 • H-S42
G
WT 2
E
F
Examples for
active loudspeakers variant
Mono Rear
2 Mono Rear
2 Stereo Front or Rear
2 Stereo Front and Mono Rear
2 Stereo Front and Rear