Toroidal Ferrite Core - Samsung HT-F9750W Handbuch

Getting Started

Toroidal Ferrite Core

For the Power Cord
POWER
<Main Unit>
If you attach a Toroidal ferrite core to the power cord, it will help to prevent RF interference from radio signals.
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Make a loop twice in the power cord.
3. Attach the Toroidal ferrite core to the power cord as the figure shows and press it until it clicks.
For the Speaker Cable
FM ANT
CENTER FRONT
OPTICAL
ASC IN
SUBWOOFER FRONT
DIGITAL
IMPEDANCE : 3
AUDIO IN
<Main Unit>
Main Unit
1. Open the ferrite core by pulling up the tab.
2. Make a loop twice in the Speaker Cables.
3. Attach the ferrite core to the arranged cables and press to close it until you hear a click.
• Insert the ferrite core as close to the main unit as possible.
SWA-6000
Make 3 loops of the speaker cables that are connected to the REAR L and REAR R terminals of the wireless receiver
(SWA-6000) and insert the ferrite core in the same way as step 3 above.
12
|
English
FRONT TOP
L L
FRONT TOP
R R
<SWA-6000>
<SWA-6000>