Operation Of Digital Locomotives - FLEISCHMANN Z21 Benutzerhandbuch

Digital centre
Note: Easy programming of your
loco decoder
▶ Place loco onto programming track
▶ Start the Z21 mobile app
▶ Switch to programming mode
▶ Enter the new parameters
▶ Ready!
42

2.4 Operation of Digital Locomotives

The Z21 Digital System is suitable for the control of all locomotives using Roco loco decoders or any
DCC-compatible decoders. Your Z21 Digital System can administer up to 9,999 loco decoders.
The preconfi guration by the factory of all Roco and Fleischmann locos is decoder address 3. If you
use several locos on your system simultaneously, you need to assign a separate decoder address to
each one.
With the Z21 Digital System, this is very simple: put the locomotive as the only loco onto the pro-
gramming track. Select the locomotive on Z21 mobile app and give it a name and decoder address
not yet assigned in the programming mode. That's it!
All magnetic items (switches, decoupling tracks, signal decoders) equipped with a digital decoder
can be programmed and controlled with the Z21 mobile app just as easily.