Unpack, Connect And Go; How To Connect Your Z21 Digital System - FLEISCHMANN Z21 Benutzerhandbuch

Quick Start Guide
36

1. Unpack, Connect and Go

This manual shows you how to operate your Z21 Digital System and control your layout using the
Z21 mobile and driver stand apps. Please prepare the following items:
▶ the Z21 Digital Centre and the supplied AC adaptor
▶ the supplied WLAN router and the supplied AC adaptor
▶ the supplied network cable
▶ your smartphone or tablet PC with Internet access, optionally or additionally the multiMAUS
(Art. No. 10810)
In addition, you will also need access to your Roco and Fleischmann layout, ideally prepared with a
powered track without capacitator, as e.g. Art. No. 61190 (geoLine), Art. No. 42517 (RocoLine), Art.
No. 22217 (Fleischmann N) or Art. No. 6430 (Fleischmann H0).

1.1 How to Connect Your Z21 Digital System

1. Place the Z21 Digital Centre into your system for good accessibility.
2. Connect the supplied clamping terminal to the powered track. Ensure good contact.
2. Plug the cable of your powered track into the track socket "Main Track" of the Z21 Digital
Centre.
3. Connect the switching adaptor to the DC power socket "DC Power".
4. Connect the switching adaptor of the Z21 Digital Centre to the mains power outlet.