Tecsis F1301 Betriebsanleitung Seite 29

Betriebsanleitung/Operating manual
F1301/F13C1
F13C1 SIL-3 (Option)
Output signal 4..20mA (2-wire)
Circular connector M12x1, 4-pin
Pin configuration M12x1 (4-pin) /
Open cable outlet of the tecsis standard connection cable (STL 288,
black)
Electrical
connection
Supply: (UB+)
Supply: (0V)
Supply Relay: (UR)
Supply Relay: (0V)
Signal: (+)
Signal: (-)
The cable shield is connected to the earth of the transducer. The
shield of the accessory cables is connected to the knurled nut and
therefore the transducer earth.
The earth cables can be extended or shortened without problems.
Only shielded and low-capacity cables must be used for extending.
The shield must also be properly connected.
www.tecsis.de
4...20 mA (2 – wire)
Pin Cable outlet
1
3
2
4
1
3
thread M12x1
BD_BE 982
Output signal 0...10V (3-wire)
Circular connector M12x1, 4-pin
brown
blue
white
black
brown
blue
screen thread M12x1
0...10 VDC (3 – wire)
Pin Cable outlet
1 brown
3 blue
2 white
3 blue
4 black
3 blue
screen
29