Output Signal 4; Wire ) - Tecsis F1301 Betriebsanleitung

Betriebsanleitung/Operating manual
F1301/F13C1
Avoid leakage fields from transformers, motors and contactors.
The transducer, the amplifier and the display unit must not have
multiple earths. Attach all equipment to the same protective
conductor.
The plug or cable connection assignments can be found on the name
plate. Unless otherwise agreed, the following assignments are used as
standard.
F1301
Output signal 4..20mA (2-wire)
Circular connector M12x1, 4-pin
UB+/S+
Output signal 0...10V (3-wire)
Circular connector M12x1, 4-pin
UB+
S+
Pin configuration M12x1 (4-pin) /
Open cable outlet of the tecsis standard connection cable (STL 288,
black)
Electrical
connection
Supply: UB+
Supply: 0V
Signal: S+
Signal: S-
28
4
3
1
2
OV/S-
940E01
4
3
1 2
OV/S-
940E04
4...20 mA (2 – wire)
Pin Cable outlet
1
3
1
3
thread M12x1
BD_BE 982
Cable outlet
Cable outlet
brown
blue
brown
blue
screen thread M12x1
UB / S+
brown
0V / S-
blue
screen
940E03
UB
brown
S+
black
0V / S-
blue
screen
940E06
0...10 VDC (3 – wire)
Pin Cable outlet
1 brown
3 blue
4 black
3 blue
screen
www.tecsis.de